Sec. 206.103. - Inspection of vehicles; grounds for suspension and revocation of permits.

(a) An applicant for a permit, and a permittee, shall produce each vehicle for which a permit is sought, or which is operated under a permit, for inspection or reinspection at such reasonable times and places as the Public Works Department (hereinafter referred to as Department) shall require. Failure to produce a vehicle for inspection shall constitute an abandonment of an application for a permit, or shall result in automatic suspension of a permit until the vehicle is produced for inspection. If, on subsequent inspections, the vehicle complies with this chapter, the permit may be issued or reinstated as applicable. (b) If an inspection discloses that a vehicle does not comply with this Chapter, the permit for the vehicle may be suspended until either: (1) The vehicle is placed in compliance; or (2) Such time as the Department may designate for placing the vehicle in compliance. In the first case, the permittee shall notify the Department when he considers the vehicle to be in compliance, and he shall present it for reinspection at a time and place designated by the Department. In the second case, the vehicle shall be presented for reinspection at the expiration of the time and at the place designated by the Department. If the reinspection discloses that the vehicle again does not comply, the permit may be revoked. (Ord. 70-650-526; Ord. 71-397-181; Ord. 83-591-400, § 1; Ord. 2008-513-E, § 1) Note— Former § 520.103.