Sec. 656.390. - Workshop use.

(a) Land use. Land designated for workshop use may contain one or more of the following uses: Artists' studios and accessory gallery Artisanal use Automobile parking garages Automobile minor service and repair shops Bait and tackle shops Bakeries (wholesale) Banks (excluding drive-in teller services) Cabinet shops Cold storage warehouse Dance studios Dry cleaning and dying establishments Gasoline service stations Glass installation Health and exercise clubs Interior design shops Leather goods manufacturing (excluding tanning) Locksmith shops, sharpening and grinding shops Hardware stores Mail order offices and storage Office buildings Photography labs Pottery shops Printing shops Restaurants (excluding drive-through service) Secondhand stores Upholstery and furniture shops Veterinarian hospitals in sound proofed air conditioned buildings Wholesale sales room and storage rooms (b) Land allocation. (1) Workshop use building lots shall constitute a minimum of three percent and a maximum of seven percent of the gross area of the neighborhood proper. (2) Workshop use lots shall not be within 300 feet of the geometric center of the neighborhood proper or the mandatory square. When a TND borders land designated on the FLUM as agriculture or open land, then workshop land use lots shall not be permitted within 330 feet of such neighborhood proper boundary. (c) Lots and buildings. (1) Buildings on workshop use lots shall have a setback of zero or five feet from the frontage line. The setback for corner lots shall not exceed five feet from the frontage line and the side street line. (2) Street-front entries shall be at-grade to allow handicap access. (3) Buildings on workshop use lots shall cover no more than 50 percent of the lot area. (4) A minimum of 15 percent of the lot area shall be developed as landscaped open space. (5) Buildings on workshop use lots shall not exceed 35 feet in height. (6) Workshop use lots shall be separated from other use types at the side and rear lot lines (except an entry on the alley) by a continuous masonry wall no less than six feet nor more than eight feet in height. (7) Workshop use lots shall have a maximum width of 300 feet. (d) Streets and alleys. (1) Workshop use lots shall front on Local Street #1 or #2, as depicted in the land development procedures manual. (2) Posted vehicle speed for workshop use streets shall be the minimum required by law. (3) Workshop use lots may front on through streets if approved by the City Council at the time of submission. (4) Workshop use lots shall have their rear lot lines adjacent to an alley, except where the rear lot line adjoins a greenbelt. (Ord. 94-607-773, § 1)