Sec. 656.399.45. - Industrial sanctuary overlay zone buffer requirements.

(a) Industrial sanctuary overlay zone buffer distance requirements are set forth in Table 399-1 below and are applicable to all properties which have been rezoned or have been the subject of land use changes since June 1, 2007 within an industrial sanctuary overlay zone. The buffer areas may consist of passive recreation, underground utilities, off-street parking spaces and parking garages, stormwater retention, landscaping, visual screening, wetlands and other conservation lands. Public rights-of-way are deemed to satisfy the buffer distance requirements. INDUSTRIAL SANCTUARY BUFFER STANDARD MATRIX Table 399-1 Zoning District of property located within an Industrial Sanctuary overlay zone Proposed LU/Zoning Change IW IH IL IBP CO, CRO Commercial RR, RLD RMD, RHD IW 0 0 0 LDC LDC LDC LDC LDC IH 0 0 0 LDC LDC LDC LDC LDC IL 0 0 0 LDC LDC LDC LDC LDC IBP LDC LDC LDC 0 LDC LDC LDC LDC CO, CRO, RO 100' 100' 50' LDC 0 LDC LDC LDC Commercial 50' 50' LDC LDC LDC 0 LDC LDC RR, RLD 300' 300' 200' 50' LDC LDC 0 LDC RMD, RHD 200' 200' 150' LDC LDC LDC LDC 0   LDC = Refers to existing buffer requirements set forth in Part 12, Chapter 656 , Ordinance Code. Commercial includes those zoning districts listed in Section 656.302 (b), except for the CO, CRO, and RO zoning districts. RR and RLD includes all RLD zoning districts. RMD and RHD includes all RMD and RHD zoning districts. _____ The buffer requirements of this Section which apply to the above-referenced districts shall apply to those portions of a Planned Unit Development district which are devoted to uses permitted in these respective districts, unless specifically provided otherwise in the written description of the intended plan of development. (b) The buffer distance requirement shall be waived if the use of a property zoned IW is accessory to other industrial uses. (c) Within an industrial sanctuary overlay zone, the non-industrial property shall satisfy the buffer distance requirement. Within an industrial sanctuary overlay zone, if a proposed industrial use is located adjacent to an existing non-industrial use then the existing buffer requirements set forth in Part 12, Chapter 656 , Ordinance Code shall apply to the industrial property. (Ord. 2007-398-E, § 4; Ord. 2007-560-E, § 2; Ord. 2017-796-E , § 4)